This Deluxe Combination Blanket & Fluid warmer features 4 digit LED display, window doors, control lock programming and auto time programming. Its 18" depth perfect for built-in OR.
Top compartment for fluids, lower compartment for blankets
Dual-cabinet design with 20 gauge stainless steel exterior casing and doors
Window doors and interior lighting provides at-a-glance inventory from across the room
Separate temperature controls for each compartment
The cabinet is warmed using Electro-thermal Radiant Heat Technology to assure accurate set-point temperatures
The electrothermal cable is positioned in the floor and two sides of the warming cabinet, providing even heating of the interior chamber
The blanket warming chamber contains an epoxy-coated blanket support assembly and two (2) shelves
The fluid warming chamber is equipped with one (1) white, epoxy-coated basket to accommodate fluids packaged in bags or bottles, mounted on basket rail supports. The basket has a capacity of 18 1-liter bottles or equivalent.
The cabinet is furnished with four (4) leveling feet
Standard Right hand door swing (optional Left hand door swing available, please contact Customer Service for a quote on this feature)
Warranty: • Three Years on Parts • One Year Service • Lifetime Technical Support
Each chamber's temperature is regulated by a separate electronic control consisting of a 4 digit L.E.D. display, ON/OFF key, heat indicator light, increase and decrease keys, built in lock-out features and a series of prompt sequence indicator lights
Each control can easily be set to operate in Fahrenheit or Celsius
Fail-safe feature "remembers" the operational mode in the event of a power failure. Once power is restored, the warmer will continue where it left off
A thermal shut-off system, separate from the electronic controls, is included as an additional safety feature
The fluids warming upper compartment:
Has individual control settings for irrigation fluids (IRR) and intravenous fluids (INJ) to allow for precise temperature regulation
IRR temperature may be adjusted from 98°F to 150°F (37°C to 66°C) while the INJ temperature range is 98°F to 104°F (37°C to 40°C)
A fan located inside the chamber mixes the air to prevent temperature stratification and to ensure an accurate chamber temperature within +0/-2°F for set points of 98°F to 104°F and within +0/-3°F for set points of 110°F to 150°F
An alarm will sound if temperatures exceed 10°F (6°C) above the set-point temperature, and an OVERTEMP indicator will blink indicating an over-temperature condition.
The blanket warming lower compartment:
The design and operational characteristics of the chamber eliminate the need for a heat circulating fan
The electronic control has an adjustable temperature range of 98°F to 200°F (37°C to 93°C)
TIMER mode allows the user to program the control to automatically turn on and turn off once during a 24-hour period at a selected time. This enables the blanket warming chamber (only) to be shut off automatically at night to save energy, but to turn on again in the early morning to ensure warm blankets are available
Power: 120 V.A.C - 50/60 Hz
UL & CSA approved
Fluid Compartment :
Capacity: 28 liters
Dimensions: 26 1/2" W x 17 3/8" D x 12 1/2" H
Size: 8.7 cubic feet
Dimensions: 26 1/2" W x 17 3/16" D x 32 1/2" H
Overall Dimensions: 31" W x 21 3/4" D x 66 1/2" H
Please Note: This item ships motor freight carrier. During the checkout process you will be required to indicate whether your facility requires liftgate or inside delivery services. (These services are described on our shipping information page.) In the order comments please include a name & phone number for the delivery point of contact. Please also include receiving hours and any other delivery requirements or instructions. If additional services necessitate an additional fee, you will be contacted by Customer Service. If you have questions about the motor freight delivery process please contact Customer Service prior to placing your order.
About this Brand
Since 1947, family-owned Pedigo has been making chrome and stainless steel products for the healthcare industry. They have earned a reputation for products that are built to last. From its Vancouver, Washington manufacturing facility in the Portland, OR metro area, they make over 200 products, including stools, instrument tables, IV stands, surgical case carts, exchange and distribution carts, bassinets, and stretchers/gurneys. Pedigo strives to make quality products in the USA while remaining conscious of their environmental footprint. They actively work to minimize the impact of their manufacturing practices on the planet.
Request for Return must be submitted to Customer Service within 14 days of product receipt. All returns must be in unused, resalable condition in the original packaging. A restocking fee will be deducted at the discretion of the manufacturer. All shipping charges remain payable by the purchaser.