Product Description

Face Mask Dispensers are an excellent way for creating organization within your facility. This dispenser is available in three sizes and will adequately store and organize your face mask boxes.

Features:

  • Constructed of durable ABS
  • Availabe in Gray & White
  • Designed to fit most face mask box sizes and styles
  • Makes face masks easily accessible
  • Keyholes and hardware for wall mounting to save work space or can sit on table top
  • Suction cups included for mounting on glass surfaces for UM3211 and UM3212 models
  • Excellent resistance to Glycerine, Inorganic Salts, Alkalis, Many Acids, Most Alcohols and Hydrocarbons
  • Limited resistance to Weak Acids
  • Poor resistance Strong Acids and Solvents, Ketones, Aldehydes, Esters, and some Chlorinated Hydrocarbons
  • Maximum Temperature: 176°F (80°C)
  • Minimum Temperature: -4°F (-20°C)
  • Autoclavable: No
  • Melting Point: 221°F (105°C)
  • Tensile Strength: 4,300 psi
  • Hardness: R110
  • UV Resistance: Poor
  • Rigid
  • Specific Gravity: 1.04

Specifications:

  • Dimensions (Width x Height x Depth):
    • UM3211: 8" x 5" x 6.25" - Weight = 0.8 lb
    • UM3212: 8" x 14" x 6.25" - Weight = 1.6 lbs
    • UM3213: 8" x 23" x 6.25" - Weight = 2.6 lbs
  • Inside Dimensions (Width x Height x Depth):
    • UM3211: 7.75" x 4.875" x 6"
    • UM3212: 7.75" x 13.875" x 6"
    • UM3213: 7.75" x 22.875" x 6"
  • Weight Capacity:
    • UM3211: 5 lbs.
    • UM3212 and UM3213: 10 lbs
  • Dispenses: Face mask from boxes no larger than 7.75"W x 6"D - Top is open

Specifications

Specifications
Manufacturer Universal Medical Inc.
Overall Length 6.25"
Overall Width 8"
Country of Manufacture United States
Item Ships From Illinois
GSA Contract Number V797D-40002

Product Video

 

Instructions

Warranty: RI Plastics warrants their products to be free from defects in materials (naturally occurring blemish in plastic etc) and workmanship (glue joints etc) for the life of the product, when used for the intended purpose it was made for, and properly maintained according to specifications. Proper care should be taken to ensure that the correct cleaning materials/chemicals are used as suggested. The improper use of cleaning materials may result in crazing, which is not covered by warranty. The warranty does not cover scratches due to normal wear and tear, breakage due to the product being dropped or other misuse/abuse. All warranty claims are at the discretion of the manufacturer.

Cleaning Instructions:

  • Washing ABS with a Mild Detergent is sufficient for most general applications. Be sure to rinse with tap water and then rinse again with distilled water. Do not use abrasive cleaners or scouring pads.
  • Ultrasonic Cleaners can be used as long as the item does not rest on the bottom of the tank. Use a cleaning basket for best results.
  • Do not use this product with Labware Washing Machines, Autoclaving, or Dry Heat
  • Removing Grease and Oils: Washing with mild detergent will remove grease and oils in many situations.
  • Removing Organic Matter: Soaking ABS in a chromic acid solution will remove organic matter, but since it is strong oxidizing agent, it will eventually embrittle the plastic. To minimize embrittlement, soak for no more than 4 hours. Sodium hypochlorite solutions (bleaches) are also effective at removing organic matter. Use at room temperature.
  • Gas Sterilization: ABS may gas sterilized (ethylene oxide, formaldehyde). Allow an appropriate aeration time suited to the particular application before using the item.
  • Chemical Disinfectants: ABS may be cleaned with most commonly used disinfectants (formalin, iodophors, quatemary ammonium compounds, benzalkonium chloride). There may be some surface attack (crazing) when using a more chemically aggressive disinfectant for a prolonged time.

Returns

In order to return this item a valid Return Authorization number must be obtained from the Customer Service department within 14 days of receipt of the item. A restocking fee may be deducted at the discretion of the manufacturer. Custom items are not able to be returned. Customer is responsible for all shipping fees.

Reviews 1

Ask a Question

Customer Questions
This product has no questions.
Did you find what you were looking for?