Stealth Coated Urgent Care Sponge Bundle YB-C-A02 includes one of the following:
YCAA - Stealth Cote Adult Finger Oblique Sponge - 10.5" L x 6" W x 3" H
YCAD - Stealth Cote Adult Lateral Finger Sponge - 13" L x 8" W x 3" H
YCAK - Stealth Cote Circular Head Sponge - Diameter: 7" (Top) - 9" (Base) x 1.5" H
YCBC - Stealth Cote 45 Degree Spinal Wedge Sponge - 13.5" L x 10" W x 7" H
YCBD - Stealth Cote 45 Degree Spinal Body Wedge Sponge - 27.75" L x 10" W x 7" H
YCBE - Stealth Cote 34 Degree Wedge Sponge 2-Piece Set - 9.75" L x 5.5" W x 3" H
YCBJ - Stealth Cote 12 Degree Wedge Sponge 2-Piece Set - 9.25" L x 10.5" W x 2.25" H
YCBL - Stealth Cote Rectangle Sponge - 3" H, Top: 7.5" L x 10" W, Bottom: 12.5" L x 10.25" W
YCBN - Stealth Cote Rectangle Sponge - 3" H, Top: 18" L x 14" W, Base: 20.5" L x 16.25" W
Coated Sponges feature a proprietary medical grade, fluid-resistant, cleanable coating over a standard (core) foam interior. Minimal shadowing with low attenuation. Light green color. Coated sponges are radiolucent.
Stealth Sponges are designed with proprietary "flared" angles to offer significantly reduced artifacts during viewing. Flared sides will increase overall size.
Anti-microbial: antibacterial and antifungal
Cleanable, fluid-resistant coating
Meets the new California 2015 Technical Bulletin #117-2013 standards
Light green coating
About this Brand
For over forty years, Techno-Aide has stayed true to one simple goal - provide radiologists with products to empower them to take the best images easily and safely. Successfully delivering on that goal has allowed the company to grow into a leading US-based manufacturer of imaging solutions. Techno-Aide's broad range of patient positioners is a stand out. Its Stealth positioning wedges and sponges incorporate proprietary angles that reduce artifacts. Coated wedges and sponges feature a medical grade, fluid resistant coating that's a "must have" in your fight to control infections. Techno-Aide's full range of imaging table pads include both cost-effective Economy and Standard pads plus Premium Plus pads that provide the ultimate in patient comfort and stability on imaging tables and stretchers.
Country of Manufacture
Item Ships From
Warranty: Techno-Aide warrants to the original end user all products manufactured by the company to be free from defects in material and workmanship under normal use and service for the period of one (1) year from the date of purchase. This warranty does not cover damage dues to abuse, modification or improper use, or for any use which exceeds the published capacity of the product. The manufacturer reserves the right to deem any and all product defects or damage not covered by warranty for any of the aforementioned reasonings.
Cleaning & Care Instructions:
Techno-Aide recommends cleaning with cold water and a mild detergent immediately after contact with fluids. Household 409 Spray can be used to clean and remove dust and dirt from your coated sponge.
To disinfect your sponges, Techno-Aide recommends the use of disinfectant wipes such as PDI Sani-Cloth AF3 Alcohol Free Germicidal Wipes. Allow a drying time of at least 3 minutes.
PDI Sani-Cloth Bleach wipes can be used as a disinfectant if you strictly follow the manufactures guidelines.
Store your sponges in a clean and dry area when not in use.
Do not autoclave or launder.
Do not soak/submerse sponges in water.
Failure to adhere to the above recommendations will shorten the life of your coated sponges, promote discoloration of the surface, and will result in void of your warranty.
Return authorization must be obtained from Customer Service within 10 days of product receipt. Product must be returned in new, unused condition in its original SEALED packaging. All returns are subject to a minimum 25% restocking charge. All shipping charges remain payable by the purchaser. If a foam positioner shows questionable artifacts, the restocking fee may be waived pending review of a customer submitted copy of the images showing artifact in question. As these items will have been opened for use, the customer must also include a picture of the items current condition to indicate it is in brand new condition.
Returns for any reason will not be permitted for foam products that are damaged, soiled, marked on (with pen, marker or labels etc.), or heavily used. Returns are not permitted for foam discoloration as this is a normal process of foam oxidation.