Product Description

Blood, urine, and other fluids/contaminants can easily penetrate CT table tops. Clean up is time consuming and often leaves residue on the cushion and machine, resulting in component failures & unscheduled down time. The CT Slicker® reduces these problems by containing contaminants on the table top, or shunting them to the floor. The Slicker's side flaps help to protect CT table rails from stretcher scrapes and dings. All Slickers attach to the table using high grade hook and loop closures for long wear and reliability.
 
The slickers are latex free and the vinyl materials meet ISO 10993 biocompatibility requirements. All of our products also meet applicable NFPA flammability standards. While we recommend using CDC approved bleach mixtures for disinfecting the Slicker, any standard cleaning and disinfection agent may be used.

All CT Slickers and accessories are designed to fit specific CT tables.

Please note some slickers include a cushion, others are only covers which should be used over your existing cushion. Also listed below are additional accessories should your table require additional protection.

  • A slicker cover only is a poly film cover that fits over the original equipment pad that came with your table. Each slicker is built to fit the indicated original equipment pad precisely. If you are using a second market pad, the fit may vary.
  • Slicker cushions eliminate fit problems. They are a lined pad that is permanently welded inside a slicker cover. Each slicker cushion is designed to fit the original equipment table for a specified machine. The pad is not replaceable, but is a very inexpensive way to renew the pad at the same time as the cover.
  • Country of Origin: United States of America

Full Sized Slickers qualify for free ground shipping.  Accessorial items such as foot switch covers, do not currently qualify for free shipping.

Specifications

Specifications
Manufacturer Radscan Medical
Item Ships From Arizona
GSA Contract Number V797D-40002

Instructions

Manufacturer's cleaning instructions:

Slicker covers and cushions are not sterile when shipped. A thorough cleaning with a bleach / water solution is recommended by the center for disease control before each use. Some germicide solutions may cause discoloration of the cover, and create a sticky film. Adhesive remover or nail polish remover will clean off tape residue easily without harming the cover.

If the cover is damaged by puncture or small cuts, temporary repairs may be made by cleaning the area with acetone and applying a patch using a high quality crystal clear packing tape until you can procure a replacement.  These repairs should never be used as a permanent solution.

Replacement needs of the cover/cushion is dependent on patient traffic, abuse (back boards, trauma use), and age. In normal use, a replacement cycle of 1 year is recommended.

Product warranty:

90 days free from manufacturing defects.

Returns

Due to infection control concerns, this manufacturer is not accepting returns for any reason at this time. This item is not able to be returned. Please be sure you have selected the correct part. Please contact Customer Service if you require assistance in choosing the best option for your equipment.

Reviews

Ask a Question

Customer Questions
This product has no questions.
Did you find what you were looking for?