Rubber Patient Restraint Strap with 2 Buckles
Product Description
- Strap Material: All Rubber, Conductive
- Mid-Panel Dimensions: 18" L x 5" W
- Strap Width: 2"
- Buckles: Two Airplane Style buckles to adjust strap length
- Latex Free
- Available in 3 lengths
- Approximate item weight: 1.5 lbs
About this Brand
Since 1983, Universal Medical has used its unique position of serving thousands of healthcare providers, including large acute care hospitals, surgical and imaging centers, and small private practices, to offer our own branded products that deliver more features or more economical buying choices. In many cases, the idea behind our branded products originated with healthcare providers frustrated by an unmet need or the lack of a cost-effective solution. You won't find our branded products in every category. We don't offer them to boost margin or add noise to the market. All of our branded products share a common element and a simple purpose: offer a clear, solid value.
Specifications
| Manufacturer | Universal Medical Inc. |
|---|---|
| GSA Contract Number | V797D-40002 |
Product Video
Instructions
CLEANING OF SOILS & STAINS: Do not use products or methods that are not listed below. Do not Apply tape to any Pad.
- Wash with a generous application of neutral soap suds and lukewarm water. Rinse with water and dry. Do not immerse.
OR
- Use a diluted bleach solution of 10-parts water to 1-part bleach. Wipe dry with a clean cloth. Do not immerse. Bleach MUST be diluted to the 10:1 ratio.
All chemicals/solutions MUST be diluted to the manufacturers recommendations. No chemical or solution should be left to dry on the pad surface. After the allotted time has passed to insure disinfection, the pad surface should be wiped again with a wet cloth to remove the remaining chemical or solution.
DISINFECTING: Do not use products or methods that are not listed below. Do not Apply tape to any Pad.
- Use Lysol I.C. Disinfectant Spray by National Laboratories, Montvale, NJ, per manufacturer's instructions. Reference: National Laboratories Item # 95029-000
- Use a diluted bleach solution of 10-parts water to 1-part bleach. Wipe dry with a clean cloth. Do not immerse. Bleach MUST be diluted to the 10:1 ratio.
All chemicals/solutions MUST be diluted to the manufacturers recommendations. No chemical or solution should be left to dry on the pad surface. After the allotted time has passed to insure disinfection, the pad surface should be wiped again with a wet cloth to remove the remaining chemical or solution.
