Product Description

  • Offers a trim yet shielded comfortable design
  • Has binding on the edges
  • Fastens with rear hook & loop closure
  • Standard Protection: 0.5mm Pb Equivalency
  • Latex Free
  • Available in:
    • Small 22.5" L with a Bib Size of 9" x 3.75"
    • Large 25.5" L with a Bib Size of 10" x 5.5"

Return Policy: Due to the fact that these items are made to order in your size and/or color selection, the manufacturer does not accept returns.

Please note all radiation protection apparel items are made to order. Production time will be 10-14 business days for your item to be made before it is shipped. Shipping/transit time is additional.

If an expedited shipping method is selected, it will change ONLY the number of days your shipment is in transit; it will have no effect on item production time.

Specifications

Specifications
Manufacturer Shielding International
Country of Manufacture United States
Item Ships From Oregon
GSA Contract Number 36F79724D0164

Product Video

 

Instructions

Failure to properly care for your garment may result in harm to the garment, as well as void its 2 Year Limited Warranty.

Storage: Don't fold, crease, drape or sit down tightly on your SHIELDING garments. We strongly recommend that our aprons be hung on a heavy duty chrome hanger. Hook and loop closures must be secured properly to avoid snagging or tearing of fabric. Always store apron with hook and loop closed. Avoid contact with hot surfaces or lengthy direct exposure to sunlight. For transportation, the garments should be carefully rolled up and put in a box or tube.

Cleaning: Keep your garment clean by wiping away stains as soon as possible, using cold water and mild detergent. Do not autoclave. Do not dry clean. Do not iron. Do not machine wash. Do not use bleach or harsh chemicals.

Approved disinfectants for vinyl and weblon materials: Galahad, LPH, Amphyl, One-Stroke, Vesphene II, Viro-Chek, Alcide LD.

Inspection We recommend that your x-ray protective garment is inspected thoroughly upon receipt and at regular intervals as determined under your radiation safety program. During a plain film radiographic inspection you may observe:

  • Light spots, small or large, may appear which indicate localized thicker attenuating content particles. This effect increases xray protection and should be of no concern.Darker shaded areas can appear which usually indicates a thickness variation in the material. If a sharp edge defines the darker area, this may be the result of damage to one or more of the garment's 2 to 5 plies of protective material. This is often caused by stress from the misuse and/or improper handling of these garments (i.e. folding, draping or creasing the garments).
  • A small amount of dark spots, often referred to as pin holing can appear which is inherent to the manufacturing process. As long as there are no dark spots exceeding 5 mm in diameter health physicists have determined they are of no concern. This should not be interpreted as defective manufacturing. There should be concern if you find dark spots or holes larger than 5 mm or an area which shows many small spots clumped together.
  • There should be concern if dark lines appear as they usually indicate possible cracks or severe thinning in the material. This is normally caused by one or more plies cracking or deteriorating as a result of misuse, mishandling, or age.
  • Please inspect garments for any visible defects in workmanship and notify us immediately if your garment is not satisfactory.

Warranty: SHIELDING INTERNATIONALâ„¢ warrants Regular Lead and Lightweight Lead x-ray protection apparel from material defects and workmanship for a period of (2) years from the date of purchase. Our warranty does not cover damage from misuse, accident or neglect. Seller's obligation is hereby limited exclusively to repair and replacement of any defective products. Seller hereby disclaims all other warranties, either expressed or implied including any implied warranty of merchantability. There are no warranties which extend beyond the description of the face hereof.

Returns

Due to the fact that these items are made to order in your size and/or color selection, the manufacturer does not accept returns.

Reviews 1

Ask a Question (2)

Customer Questions
What size neck does the large fit?
Assuming a 3" overlap on the collar strap: The small is recommended for necks up to 16" The large is recommended for necks up to 19" If the wearer prefers a different overlap then the measurement varies accordingly.
Can i get this product embroidered? Will it fit a larger man - I am 6' 1", 200 pounds.
This collar is available in two lengths, Small which measures 22.5" L and Large which measures 25.5" L. The large would most likely fit your needs the best. Embroidery is available on all of our aprons and collars for an additional fee. To have a custom logo embroidered, the plant will need a digitized copy submitted or you would need to pay a one time fee to have it digitized. The purchaser must ...
Did you find what you were looking for?