Product Description

Protect your eyes from harmful radiation with these unisex stylish wrap-around plastic frame RG-MX30 radiation protective glasses!

  • Distortion-free SF6HT Schott glass radiation-reducing front lenses with 0.75mm Pb lead equivalency
  • High-Lite transmission with 20% more visible light, 1.80 High Index Lenses
  • Standard radiation lenses have a measured thickness of 2.4mm - 2.5mm. Prescription lenses will vary in thickness based on the individual user's prescription requirements.
  • High impact TR-90 nylon frames fit best for Small to Medium face sizes
  • Rubberized soft grip temple bars and rubberized saddle bridge nose pad for extra comfort
  • Interlocked retainer cord clicks into the back of the temple bar for a snug fit
  • Frame Dimensions - Bridge Size: 17mm, Frame Width: 129mm, Temple Size: 130mm, Lens Width: 53mm, Lens Height: 32mm
  • Weight: 73.9 grams
  • CE 0598 Certified
  • Ships with case, adjustable strap & microfiber pouch
  • Prescription Glasses: When ordering, please include a Pupillary distance on your Prescription
  • RX Limitations:
    • Sphere Limitation: -6.00/+3.00
    • Cylinder Limitation: -3.00/+3.00

About this Brand

Specifications

Specifications
Manufacturer Phillips Safety Products
Latex Free Yes
Actual Product Weight 73.9g
Available in Rx Yes
Gender Unisex
Item Ships From New Jersey
GSA Contract Number 36F79724D0164

Literature

pdf
(Size: 1 MB)

Product Video

 

Instructions

Storage: Eyewear should be stored in clean and sanitary "ready for use" condition in an area away from dust, dirt and other contaminants. Storage at normal room temperature and low relative humidity is ideal.

Cleaning for Standard and Anti-Reflective Coated Lenses: Rinse all dirt, dust and particles from lenses by running under a stream of tepid water. Failure to rinse debris will eventually result in lens scratches that cannot be removed. Apply a small amount of water-diluted dish soap to lenses and gently rub over the entire surface. Rinse the lenses thoroughly under a stream of water, and wipe dry with a dry cloth. Always store dry, eyewear, face-up in a storage case to avoid scratches.

Cleaning for FOG FREE Lenses: Always use a microfiber cloth to clean and dry lenses, and never rub lenses hard. Be Gentle with your lenses. Use a combination of 4 parts alcohol to 1 part water to clean lenses with a microfiber cloth. Thoroughly dry with a microfiber cloth. After cleaning, the strength of the fog free coating will be temporarily weakened. For best results, clean the glasses at the end of the day and leave them in an open, dry area outside of a storage case for several hours/overnight so that the coating can dry completely. Do not use ammonia or chlorine as a cleaner. Do not rinse or submerge lenses in water. Coating performance will be permanently affected if the above instructions are not followed. Always store dry, eyewear, face-up in a storage case to avoid scratches.

Maintenance: Examine eyewear frequently. If lenses become pitted, chipped or in other ways damaged cease use immediately. End user maintenance should be limited to tightening of hinge screws when necessary.

Warranty: All Phillips Safety products are fully guaranteed against manufacturer defects (material and workmanship) for 1 year from the date of purchase. This does not cover negligent use of the product (including scratched lenses). Coating issues caused by cleaning lenses in a manner other than listed above will void the warranty. Phillips-Safety will repair or replace any defective merchandise at no charge. All shipping charges remain payable by the purchaser.

Recycling/Disposal: All Frames are nylon, acetate, aluminum or ferrous materials. Frames can be recycled with like metals or plastics. Leaded lenses contain 70% lead oxide. Lenses should be sent to an approved lead recycling facility or may be returned to the manufacturer for appropriate disposal. Please contact Customer Service for detailed instructions.

Returns

Customers wishing to return this product must contact Customer Service to obtain a valid return authorization number within 14 days of receipt. A restocking fee may be deducted at the discretion of the manufacturer. Prescription orders cannot be returned. Frames with custom imprints cannot be returned.

Reviews 3

Ask a Question (3)

Customer Questions
It is possible to order replacement lenses for these glasses?
Repair options vary based on frame type, repair needs and original point of purchase. A Customer Service representative will be in touch with you directly to further discuss your need.
Do they have integrated opti bloc lateral protective shields to protect from scatter radiation?
This frame does not include side shields as a standard feature.
Do these glasses come with side shields?
This frame style does not come with side shields. However, you can add leaded side protection for an additional cost. If you'd like a quote for this frame style with side protection, please contact us and we will be happy to create a quote for you!
Did you find what you were looking for?