Product Description

Classic Microscope Slides from Globe Scientific provide excellent quality while offering substantial savings and are ideal for use in all routine applications. Available in a large selection of colors, corner styles and edges.

  • Frosted microscope slides are produced using a unique chemical etching process; This provides our slides with a smooth frosted finish that won't wear out slide marking pens
  • Slides are printed with "Globe" under the frosting area for orientation purposes
  • Produced from the highest quality soda lime glass
  • Hydrophilic surface allows fluids to spread across the surface of the slide
  • All microscope slides are pre-cleaned and ready to use
  • They are packaged in boxes of 72 and feature a moisture absorbent sheet in each box to prevent sticking
  • Frosted Slides: Chemically etched on two sides of one end
  • Safety Corners Style: 90° ground edges, slightly clipped corners. Corners are slightly clipped for comfortable handling and to prevent the risk of finger and hand cuts.
  • Dimensions (Width x Length): 25mm x 75mm (±0.5mm)
  • Thickness: 1.1mm (±0.05mm)

 

Standard shelf life for soda lime glass microscope slides is approximately 2 years if the below "Care and Storage of Microscope Slides" conditions are followed.

 

Please Note: Image shown Microscope Slide Frosted 1 End 1 Side

Specifications

Specifications
Manufacturer Globe Scientific
Overall Length 75mm
Overall Width 25mm
Overall Thickness 1.1mm
Item Ships From New Jersey

Literature 1

pdf
(Size: 122.8 KB)

Instructions

Care and Storage of Microscope Slides:

Transportation and storage conditions considerably affect the quality and performance of microscope slides. Follow these recommendations to ensure the integrity of your new slides.

  • Microscope slides should be stored in a dry place at constant room temperature. If the ambient temperature is constantly warming and cooling, condensation may occur, which can cause the slides to stick.
  • Slides should be kept on a pallet or shelf and not directly on the floor.
  • Do not store slides and solvents together as the slide surface can turn hydrophobic.
  • When the slides have just been received, allow them to reach room temperature before opening. This can take up to 24 hours. Keep in mind that the slides may have been in a very warm or cold vehicle and condensation can form if opened too soon after arrival.
  • Since soda lime glass is subject to an aging process, we further recommend continuously rotating stock so the oldest slides are always used first. This will ensure that all slides being used are of the highest quality.

Returns

No return will be accepted by the seller for any reason without prior written authorization. Returns will be accepted within 30 days of shipment, only if products are in new and unused condition and accompanied by a health and safety declaration as regards potential contamination with hazardous materials due to customer use of the product. The manufacturer reserves the right to assess a 20 percent restocking fee at their discretion. All shipping charges remain payable. This manufacturer assesses order cancellation fees if a submitted order is cancelled prior to shipment.

Reviews

Ask a Question

Customer Questions
This product has no questions.
Did you find what you were looking for?