Blickman Infant Bassinet Basket
Product Description
- Seamless, clear acrylic basinet basket with cardholder for easy identification
- Utilize specially formed support rods so basket can be set in the flat or Trendelenburg position
- Dimensions:
- Outside: 31" L x 16" W x 9.25" H (Head End), 8.5" (Foot End)
- Inside: 26.25" L x 11.6" W
- Footprint: 26.5" L x 12.6" W
- Six 0.75" Diameter drainage holes along bottom
- Latex Free
- Compatible to use with Bassinet Items: 8044SS, 8047SS, 8048SS, and 8049SS
- Approx. shipping weight: 12 lbs.
These items are designed for use by hospitals and other specific medical locations. We are unable to sell these items to individual consumers for residential/personal use. Orders placed by individuals shipping to residential addresses will be cancelled.
About this Brand

Specifications
Manufacturer | Blickman |
---|---|
Country of Manufacture | Israel |
Item Ships From | New Jersey |
Instructions
Cleaning Instructions:
Bassinets may be cleaned using a damp sponge or soft cotton cloth and a mild soap or detergent solution. Rinse well with clean water and then dry using a clean, soft cotton cloth. (Note: Many paper towels are abrasive and cause superficial surface scratching). The residue from adhesive tape may be removed using a good grade of mineral spirits (obtainable from most paint or hardware stores). Use such material with caution and in strict accordance with manufacturer's recommendations since they are flammable liquids. Any residual film left behind after removing tape residue should be washed off immediately as outlined above.
Cleaning DO NOTs:
Do not expose bassinet to temperatures in excess of 140 F, grease or oil. Do not use window sprays, all purpose surface cleaners, abrasive scouring cleaners or solvents such as acetone, gasoline, benzene, toluene, chlorinated hydrocarbons, or lacquer thinner for cleaning acrylic products, since these will permanently damage the surface.
Scratch Removal:
Minor surface scratches can be removed using a good automotive cleaner / wax product. Apply to scratched area with a slightly damp, clean soft cotton cloth, working the compound into the surface with firm circular motions until almost dry. Allow to dry completely, then buff with a clean, soft cotton cloth.