Welcome To Our Store!
Be the first to review this product
* Required Fields
There are no reviews for this product
Only registered users can write reviews. Please, log in or register
Question will be displayed after moderation.
All answers will be displayed after moderation.
Mounting Directions: 1) Open drawer 2) Place "J" hooks through slot in top 3) Put washer and nut on bottom side of "J" hooks 4) Place the box under the refrigerator grill and push the "J" hooks up to hook over the grill 5) Tighten the nuts Cleaning Instructions:
Washing Acrylic with a Mild Detergent is sufficient for most general applications. Be sure to rinse with tap water and then rinse again with distilled water. Do not use abrasive cleaners or scouring pads.
Ultrasonic Cleaners can be used as long as the acrylic item does not rest on the bottom of the tank.
Do not use this product with: Labware Washing Machines Autoclaving Dry Heat
Removing Grease and Oils: Washing with mild detergent will remove grease and oils in many situations.
Gas Sterilization: Acrylic may gas sterilized (ethylene oxide, formaldehyde). Allow an appropriate aeration time suited to the particular application before using the item.
Removing Organic Matter: Soaking acrylic in a chromic acid solution will remove organic matter, but since it is strong oxidizing agent, it will eventually embrittle the acrylic. To minimize embrittlement, soak for no more than 4 hours.
Sodium hypochlorite solutions (bleaches) are also effective at removing organic matter. Use at room temperature.
Chemical Disinfectants: Acrylic may be cleaned with most commonly used disinfectants (formalin, iodophors, quatemary ammonium compounds, benzalkonium chloride). There may be some surface attack (crazing) when using a more chemically aggressive disinfectant for a prolonged time.