Acrylic Sones Brachial Technique Arm Deck Radiolucent
Product Description
- Simply slides under pad no clamping, just slide the unit under the pad of the operating table where it's held firmly in place by the weight of the pad and patient in the supine position
- Made entirely of Acrylic
- Easy to adjust just lift and turn the arm-deck, even during an O.R. procedure, for quick positioning
- An excellent positioner for a Sones or Brachial procedure; provides perfect arm positioning to any desired angle
- Proper arm positioning means greater patient comfort and assistance
- Special offset shape (2 inch offset enables patients arm to be level with the operating table)
- Weight Capacity: 60 lbs.
- Strap is NOT Included
Overall Dimensions: 38" Long x 8" wide - tapering to 6" wide x 3/8" thick.
The 8" wide portion is 19" L and is designed to rest underneath the table pad.
The arm surface portion is 17.5" L x 6" Wide.
The 2" offset should abut the table pad when in use.
Specifications
Manufacturer | Universal Medical Inc. |
---|---|
Country of Manufacture | United States |
Item Ships From | Illinois |
Instructions
Warranty: RI Plastics warrants their products to be free from defects in materials (naturally occurring blemish in plastic etc) and workmanship (glue joints etc) for the life of the product, when used for the intended purpose it was made for, and properly maintained according to specifications. Proper care should be taken to ensure that the correct cleaning materials/chemicals are used as suggested. The improper use of cleaning materials may result in crazing, which is not covered by warranty. The warranty does not cover scratches due to normal wear and tear, breakage due to the product being dropped or other misuse/abuse. All warranty claims are at the discretion of the manufacturer.
Cleaning Instructions: Washing Plastics with a Mild Detergent is sufficient for most general applications. Be sure to rinse with tap water, and then rinse again with distilled water. Most plastics, particularly the polyolefins (PPCO, PP, PMP, LDPE, and HDPE), have nonwetting surfaces that resist attack and are easy to clean. Do not use abrasive cleaners or scouring pads on any plastic labware. Do not use strong alkaline cleaning agents with polycarbonate (PC).