Product Description

This memory foam imaging table pad is radiolucent and offers the most comfortable surface possible for patients without compromising image quality.
  • Table Pad Dimensions: 97" L x 18" W
  • Foam: Base Layer - 0.5" Thick Latex Free High Density Rubber, Top Layer: 1.5" thick Latex Free, ViscoElastic Memory Foam (6 lb density)
  • Cover Material: Latex Free, black, conductive, urethane coated, 4 way stretch-knit fluid proof cover
  • Cover Seams: Fluid Proof. Seams are welded for a fluid proof seal.
  • Radiolucent for artifact free imaging.
  • This item is latex free
  • Please note, this pad consists of 1.5" of ViscoElastic Foam as compared to many competitors versions of 0.5"
  • 1 Year Warranty against manufacturer's defects

Please note:

  • Item is made to the above indicated dimensions. Please double check these dimensions as table designs can change. These items are non-returnable. If your required dimensions vary from our listing please contact customer service at [email protected] for a quotation.
  • Due to its weight and/or dimensions, this item has a flat rate ground shipping fee within the Continental USA.  Expedited shipping may be available, but will require quotation from Customer Service.
  • Returns are not allowed on this made to order item.

About this Brand

Specifications

Specifications
Manufacturer Universal Medical Inc.
GSA Contract Number V797D-40002

Instructions

CLEANING OF SOILS & STAINS: Do not use products or methods that are not listed below. Do not Apply tape to any Pad.

  • Wash with a generous application of neutral soap suds and lukewarm water. Rinse with water and dry. Do not immerse.

OR

  • Use a diluted bleach solution of 10-parts water to 1-part bleach. Wipe dry with a clean cloth. Do not immerse. Bleach MUST be diluted to the 10:1 ratio.

All chemicals/solutions MUST be diluted to the manufacturers recommendations. No chemical or solution should be left to dry on the pad surface. After the allotted time has passed to insure disinfection, the pad surface should be wiped again with a wet cloth to remove the remaining chemical or solution.

DISINFECTING: Do not use products or methods that are not listed below. Do not Apply tape to any Pad.

  • Use Lysol I.C. Disinfectant Spray by National Laboratories, Montvale, NJ, per manufacturer's instructions. Reference: National Laboratories Item # 95029-000
OR
  • Use a diluted bleach solution of 10-parts water to 1-part bleach. Wipe dry with a clean cloth. Do not immerse. Bleach MUST be diluted to the 10:1 ratio.

All chemicals/solutions MUST be diluted to the manufacturers recommendations. No chemical or solution should be left to dry on the pad surface. After the allotted time has passed to insure disinfection, the pad surface should be wiped again with a wet cloth to remove the remaining chemical or solution.

Returns

This item is made to order and as such is not able to be returned.

Reviews

Ask a Question

Customer Questions
This product has no questions.
Did you find what you were looking for?