Product Description

Complete mobile unit with Standard Tilt & Rotate. Tilt and Rotate Range of Motion allows for positioning in lateral, horizontal, vertical and oblique positions.

  • Standard arm length provides maximum stability
  • Fully articulating holder
  • Bilateral Clamps securely holds flat imaging receptors up to 1.5" thick; 13.5"-20.5" wide with no height restriction, weight up to approx. 12 lbs.
  • Vertical Range from bottom of image receptor: 1" off Floor to 54" allowing ample room for imaging at several height levels
  • Posi-lock height adjustable arm with spring loaded pin
  • Arm slides vertically on 60" chromed steel post
  • Arm extends 12" from pole
  • Front of cassette is 18" from pole
  • Sturdy 24" x 24" H-Base is broad to prevent tipping
  • Locking 3" casters for easy manipulation
  • 1.5" Deep channel accepts Grids and Caps and will accommodate most receptor sizes like: Agfa, AllPro, Carestream, Canon, Dell, Fuji, GE, Kodak, Konica, Quantum, Medlink, Rayence, Samsong, Shimadzu, Toshiba, Varian, and Vieworks
  • Radiographs can be taken from any angle. Tray can be positioned face up, face down, and anywhere in between to maximize proper receptor positioning. Perfect for ER, OR, and x-ray procedures such as myelograms, decubitus studies, and three way acute abdomen exams.
  • Platinum baked enamel finish
  • Easy to clean in a "OR" or "Sterile" setting
  • Overall equipment weight is approx 54 lbs

 

Fully Adjustable Tilt & Rotation Abilities:

  • Straight Vertical +/- 90 degrees
  • Incline Forward / Backward
  • Horizontal rotation +/- 180 degrees
  • Full Rotate or Oblique Tilt
  • Face Up
  • Face Down
  • 360 degrees - Anywhere in Between

Specifications

Specifications
Manufacturer Techno-Aide
Actual Product Weight 54 Lbs
Country of Manufacture United States
Item Ships From Tennessee
GSA Contract Number V797D-40246

Literature 2

pdf
(Size: 480.2 KB)

Instructions

Warranty:

The manufacturer offers a 1 year Limited Warranty against manufacturing defects.

 

Cleaning:

  • Techno-Aide recommends cleaning holder with cold water and a mild detergent to remove all immediate contacts with fluids. 409 Spray can also be used to clean the surface to remove dust & dirt from the holder.
  • To disinfect your holder, pole, and base, Techno-Aide recommends the use of disinfectant wipes such as PDI Sani-Cloth Germicidal Wipes Cat# GWP-WAF. Allow a drying time of at least 3 minutes.

Returns

Authorization must be obtained from Customer Service within 30 days of product receipt. Product must be returned in new, unused condition. All returns are subject to a minimum 20% restocking charge. All shipping charges remain payable by the purchaser. Any painted product that is defective in "finishing" must be acknowledged within 10 days of receipt. A photo of the defective paint must be provided within 10 days of receipt for this item to be eligible for return. Painted products returned with paint defects, will not be considered to be in new, unused condition.

Reviews

Ask a Question

Customer Questions
This product has no questions.
Did you find what you were looking for?