Product Description

Complete QA from CT imaging to dose verification
  • Ionization chambers, TLD, MOSFET and Diodes easily positioned using interchangeable rods
  • Choose any point dose location by rotating the cylinders
  • Use radiographic film dosimetry - Ready Pack® and/or GafChromic® film
  • Close placement of detectors to film improves film calibration
  • CT - film markers ensure accurate film to plan registration
  • Surfaces are etched with indices for precise alignment
  • Configure with or without heterogeneities
With the 002H9K, choose any point dose location within a circular area with diameter of 11.2 cm by simply adjusting the two rotating cylinders. Lung and bone equivalent rods can be positioned at any location within the circular area for assessment of heterogeneity correction. Remove the center cylinder from the phantom body to simulate head and neck set-ups.

IMRT Phantoms are manufactured from proprietary materials that faithfully mimic water, bone and lung within 1% from 50 keV to 25 MeV. These unique materials eliminate the need for correction factors, thus improving accuracy and saving time. The phantoms simulate the patient through the entire process from CT data acquisition and planning to delivery and dose verification.

Model 002H9K Includes:
  • One (1) Water equivalent homogeneous torso section with cylindrical inserts (15 cm)
  • Two (2) Spacer slabs, 2cm
  • One (1) Spacer slab, 1cm
  • One (1) Spacer slab, 10cm
  • Four (4) Water equivalent solid rod inserts
  • One (1) Bone equivalent solid rod inserts
  • One (1) Set of CT to film fiducial markers
  • One (1) Alignment Base
  • One (1) Holding device


Manufacturer CIRS
Item Ships From Virginia
GSA Contract Number V797D-40246


If you encounter a problem with this item, please contact Customer Service within 14 days of product receipt. If unable to correct the problem, a return material authorization (RMA) number will be issued. Restocking fees may apply at the discretion of the manufacturer. All returns should be packed in the original cases and/or packaging and must include any accessories, manuals and documentation that shipped with the product. The RMA number must be clearly indicated on the outside of each returned package. CIRS recommends that you use a carrier that offers shipment tracking for all returns and insure the full value of your package so that you are completely protected if the shipment is lost or damaged in transit. If you choose not to use a carrier that offers tracking or insure the product, you will be responsible for any loss or damage to the product during shipping. CIRS will not be responsible for lost or damaged return shipments. Return freight and insurance is to be pre-paid.


Ask a Question

Customer Questions
This product has no questions.
Did you find what you were looking for?