Ferno Model 35-ANM MRI Non-Magnetic Mobile Transporter Cot with Orange 460 Bolster Mattress
Ferno®'s 35-ANM Mobile Transporter is an MR conditional cot for use with MRI and other treatment areas that require a non-magnetic gurney. Includes all of the features of the industry standard Ferno 35-A Mobile Transporter in a non-magnetic cot. Lightest MR conditional cot with a 500 pound load capacity - weighs only 74 pounds! MR conditional at 3 Tesla (3T) or less. Low foot-end lifting frame provides better leverage to shorter EMT's when lifting the Mobile Transporter. 8 levels of height adjustment/bed positions plus 2 loading heights. Supports 15 degree (approximately 10") Trendelenburg positon. Lubrication-free, easy roll wheels provide great cot mobility. Orange bolster mattress included.
Product Description
The Ferno® Model 35ANM MR conditional cot is designed for use with MRI and in specialized medical treatment areas where the cot must be non-magnetic. Includes all the great features of the standard 35A.
Features:
- Rated MR Conditional at 3-Tesla or less
- Lightest cot available with a 500 pound (227 kg) load capacity, built-in shock frame and fully adjustable gas-assist backrest to enhance patient care
- Sturdy X-frame undercarriage is easily raised by second EMT during loading
- Dual ratchet bar adjustment mechanism is simple to operate and permits eight levels of height adjustment
- Safety U-bar and hook holds the Mobile Transporter at the rear of the ambulance during unloading as undercarriage is lowered to the ground
- Low foot-end lifting frame enables shorter EMTs to get better leverage when lifting the Mobile Transporter
- Head-end drop frame and foot-end lead handle for improved EMT control/maneuverability
- Adjustable backrest angle from 0 to 75 degrees allows patient to be in a comfortable position
- Built-in shock position permits instant change in patient positioning by elevating feet 15 degrees (approximately 10") without compromising patient's breathing
- Improved lubrication-free, easy roll wheels allow for greater cot mobility
- The cam-buckles on the three restraints provided with the cot are made from plastic and are suitable for use in an MR environment but are not intended to be placed inside the bore of the MR scanner. Primary restraints (not provided) must be used when the cot is in an ambulance. NEVER use the cam-buckle restraints to secure a patient for transport in an ambulance.
- It is designed for use with the Ferno® Model 175 Cot Fastener Series (not included)
- The cot is for use with ambulances that meet the requirements of the “Star of Life” certification via Federal Ambulance Specification KKK-A-1822
Listed Conditions Of Use: The Ferno® Model 35A-NM cot has undergone testing and has been determined to be MR Conditional. In general, the cot is intended for use under the conditions listed here:
- Static magnetic field of 3-Tesla or less
- Spatial gradient magnetic field of 720-Gauss/cm or less
- Inside the MR environment (e.g., in the MR system room, close to the scanner)
- The cot is not designed or designated for use directly inside the MR system (e.g., inside the bore of the scanner).
Specifications:
- Length: Min 63" - Max 79"
- Height: Min 9" - Max 40"
- Loading Height: 32"
- Weight: 74 lbs
- Load Limit: 500 lbs
- Width: 24"
- Warranty: 2-year
- CE Certified
Please Note: This item ships motor freight carrier. During the checkout process you will be required to indicate whether your facility requires liftgate or inside delivery services. (These services are described on our shipping information page.) In the order comments please include a name & phone number for the delivery point of contact. Please also include receiving hours and any other delivery requirements or instructions. If additional services necessitate an additional fee, you will be contacted by Customer Service. If you have questions about the motor freight delivery process please contact Customer Service prior to placing your order.
About this Brand
Since 1955, FERNO has grown into a global leader in pre-hospital emergency care solutions. It got its start by addressing a customer need for a better transport cot, and it has continued that tradition by listening to the needs of EMS and medical professionals to create innovative products. Its decades of experience are built into every FERNO ambulance cot and patient transport system. It strives to maximize the delivery of patient care while improving the safety and reducing the risk of injury for both caregivers and patients.
Specifications
| Manufacturer | Ferno |
|---|---|
| Actual Product Weight | 74 Lbs |
| Overall Height | 40" |
| Overall Length | 79" |
| Overall Width | 24" |
| Weight Capacity | 500 Lbs |
| Item Ships From | Ohio |
Literature 1
Instructions
Limited Warranty: Ferno products are warranted to be free from defects in material and workmanship for a period of one year, except as follows:
- External finishes (gelcoat, paint, powdercoat, decals, etc.) are warranted for 90 days.
- Soft goods (webbing, vinyl, fabric, foam, etc.) are warranted for 90 days.
- Ambulance cots and ambulance transporters (except external finish and soft goods) are warranted for 2 years.
- EZ Glide Chairs and PowerTraxx Retrofit Kits are warranted for 2 years.
- This limited warranty applies only when you use and care for the product as described in the instructions provided with the product. Improper use and care may void this warranty. This warranty does not apply to freight damage or damages sustained through using the product.
