Ferno Model 30-NM MRI Non-Magnetic Multi-Level Lift-In Cot with Burgundy 360 Mattress
Ferno®'s 30NM is an MR conditional cot for use with MRI and other treatment areas that require a non-magnetic gurney. A lower-cost companion to the industry standard Ferno 35-ANM Mobile Transporter. Very lightweight at only 54 pounds (compared to the 74 pounds of the 35-ANM), with a load capacity of 400 pounds (compared to 500 pounds for the 35-ANM). Simple X-frame undercarriage is easy to maintain. MR conditional at 3 Tesla (3T) or less. For an even more capable and durable ambulance cot, consider the Ferno 35-XNM ProFlexx.
Product Description
The Ferno® Model 30NM MRI-conditional cot is designed for use with MRI and in specialized medical treatment areas where the cot must be non-magnetic. It is super-lightweight at 54 lbs and is easy to handle.
Features:
- Rated MR Conditional at 3-Tesla or less
- Tubular aluminum construction provides durability and strength
- Plastic bearings are provided on rotating components for easy movement
- Simple X-frame undercarriage is easy to maintain; scuff strips are not required
- Dual ratchet bar adjustment mechanism is simple to operate and permits six levels of height adjustment
- Foot-end lead handle enables EMT to control the direction of the cot
- Swing-down side rails enable convenient patient transfer from bed to cot
- Telescoping head-end frame permits overall length to be reduced for maneuvering
- Adjustable backrest angle from 0 to 75 degrees allows patient to be in a comfortable position
- Four swivel wheels allow cot to be easily handled and moved
- Infection control full-length bolster mattress is comfortable and minimizes lateral patient movement
- Use only the provide cam-buckle restraints (3) when the cot is in an MR environment. Metal-buckle or other styles of restraint may not be MR-compatible
- Use only a primary restraint (such as a metal-buckle restraint; not supplied) when transporting a patient in an ambulance. The cam-buckle restraints are not suitable for restraining a patient in an ambulance.
- The cot meets U.S.A. Federal Ambulance Specification KKK-A-1822 revision F (2007) as applicable, through Change Notice 7
Listed Conditions Of Use: The Ferno® Model 30-NM cot has undergone testing and has been determined to be MR Conditional. In general, the cot is intended for use under the conditions listed here:
- Static magnetic field of 3-Tesla or less
- Spatial gradient magnetic field of 720-Gauss/cm or less
- Inside the MR environment (e.g., in the MR system room, close to the scanner)
- The cot is not designed or designated for use directly inside the MR system (e.g., inside the bore of the scanner).
Specifications:
- Length: Min 64" - Max 76"
- Height: Min 12" - Max 32"
- Weight: 54 lbs
- Load Limit: 400 lbs
- Width: 23"
- Warranty: 2-year
- CE Certified
Please Note: This item ships motor freight carrier. During the checkout process you will be required to indicate whether your facility requires liftgate or inside delivery services. (These services are described on our shipping information page.) In the order comments please include a name & phone number for the delivery point of contact. Please also include receiving hours and any other delivery requirements or instructions. If additional services necessitate an additional fee, you will be contacted by Customer Service. If you have questions about the motor freight delivery process please contact Customer Service prior to placing your order.
About this Brand

Specifications
Manufacturer | Ferno |
---|---|
Actual Product Weight | 54 Lbs |
Overall Height | 32" |
Overall Length | 76" |
Overall Width | 23" |
Weight Capacity | 400 Lbs |
Item Ships From | Ohio |
Literature 1
Instructions
Limited Warranty: Ferno products are warranted to be free from defects in material and workmanship for a period of one year, except as follows:
- External finishes (gelcoat, paint, powdercoat, decals, etc.) are warranted for 90 days.
- Soft goods (webbing, vinyl, fabric, foam, etc.) are warranted for 90 days.
- Ambulance cots and ambulance transporters (except external finish and soft goods) are warranted for 2 years.
- EZ Glide Chairs and PowerTraxx Retrofit Kits are warranted for 2 years.
- This limited warranty applies only when you use and care for the product as described in the instructions provided with the product. Improper use and care may void this warranty. This warranty does not apply to freight damage or damages sustained through using the product.