Ferno Model 175 Complete Fastening System - Standard Wall Mount Kit
Product Description
The Ferno® Model 175 Series Antler and Rail Fastening System is designed to limit the movement of a Ferno® ambulance cot inside the patient compartment of a ground-based ambulance. The fastening system is for professional use only by trained Emergency Medical Service operators.
The Ferno® 175 Standard Wall Mount Kit provides a complete set of components and the standard-length rail (31"/791 mm). Kit includes fasteners (screws, washers, nuts) to attach the rail to the rail bracket, and tie-down knobs as needed.
- Stainless Steel Rail and Mounting Brackets for strength and durability
- Anti-Rotation Feature added to Rail to ensure correct orientation during use
- Hex Headed Knobs for ease of installation and removal
- Updated Antler Geometry for improved Bail Bar management during use
Ferno Kit #000175SW is compatible with model 30-NM, 35-A, 35-ANM, 35X ProFlexX, and 35-XNM Cots.
When properly installed and used with appropriate products, the fastening system meets or exceeds the following specifications and standards listed below. Standards and specifications are updated periodically. Current standards are available from these organizations in the U.S.A.
- NOTICE: The Model 175 fastening system does not meet the Society of Automotive Engineers SAE J3027 Recommended Practice (2014).
- AMD: Ambulance Manufacturer’s Division (AMD) of the National Truck Equipment Association Standard 004 (2019 edition), Litter Retention System Static Test.
- KKK-A-1822 (F): Federal Ambulance Specification KKK-A-1822 revision F (2007), through Change Notice 7 as applicable.
- Ontario Provincial Land Ambulance & Emergency Response Vehicle Standard 5.0, Section 20.1 Pull Test.
About this Brand
Since 1955, FERNO has grown into a global leader in pre-hospital emergency care solutions. It got its start by addressing a customer need for a better transport cot, and it has continued that tradition by listening to the needs of EMS and medical professionals to create innovative products. Its decades of experience are built into every FERNO ambulance cot and patient transport system. It strives to maximize the delivery of patient care while improving the safety and reducing the risk of injury for both caregivers and patients.
Specifications
| Manufacturer | Ferno |
|---|---|
| Item Ships From | Ohio |
Instructions
Limited Warranty: Ferno products are warranted to be free from defects in material and workmanship for a period of one year, except as follows:
- External finishes (gelcoat, paint, powdercoat, decals, etc.) are warranted for 90 days.
- Soft goods (webbing, vinyl, fabric, foam, etc.) are warranted for 90 days.
- Ambulance cots and ambulance transporters (except external finish and soft goods) are warranted for 2 years.
- EZ Glide Chairs and PowerTraxx Retrofit Kits are warranted for 2 years.
- This limited warranty applies only when you use and care for the product as described in the instructions provided with the product. Improper use and care may void this warranty. This warranty does not apply to freight damage or damages sustained through using the product.
