BrandTech SAN Short-Form Cylinder with Molded Graduations
Product Description
- SAN (Styrene Acrylonitrile Copolymer) graduated cylinders are crytal clear with molded graduations for easy measurement and increased readability
- Short form lowers the center of gravity for increased stability and reduced spills.
- Circular base
- Can tolerate temperatures of up to 60°C, without causing permanent exceeding of tolerance limits
- Food-safe according to EC Directive No. 10/2011
| SKU | Volume mL | Tolerance +/- mL |
Graduation mL |
Height mm |
Diameter mm |
Quantity per Pack |
| 64091 | 25 | 0.50 | 0.50 | 122 | 22 | 12 |
| 64191 | 50 | 1.00 | 1.00 | 142 | 27 | 12 |
| 64291 | 100 | 2.00 | 2.00 | 163 | 37 | 12 |
| 64391 | 250 | 5.00 | 5.00 | 192 | 51 | 6 |
| 64491 | 500 | 10.00 | 10.00 | 218 | 67 | 6 |
| 64591 | 1000 | 20.00 | 20.00 | 285 | 78 | 6 |
Specifications
| Manufacturer | Brandtech Scientific |
|---|---|
| Country of Manufacture | Germany |
| Item Ships From | Connecticut |
Literature
Instructions
How should I clean my volumetric plasticware?
Polyolefins, such as PP and PMP, as well as fluoroplastics (ETFE), have water-repellent surfaces that are very durable and easy to clean. For cleaning, depending on the level of contamination, commercially available neutral or alkaline detergents (i.e. Mucasol) can be used. Please note that no scrubbing agents or scouring pads should be used for labware made from plastics.
Plastic labware can be cleaned and dried in a laboratory dishwasher, noting the temperature limits of the individual products. Due to their light weight, securing the labware with washing nets is recommended; and plastic-coated wire baskets will better protect against scratching.
Plastic labware can also be cleaned in an ultrasonic bath. However, direct contact with the acoustic membrane should be avoided.
