Product Description

Vacuum gauge Set DCP3000 + VSP3000

The DCP 3000 is an outstanding vacuum gauge with large illuminated display. The VSP 3000 vacuum sensor is based on thermal conductivity (Pirani) and offers a wide measurement range from atmospheric pressure down to 10-3 mbar. The wetted parts are made of chemically resistant plastics (PBT, PUR) and alumina ceramics. It features a much better chemical resistance and ruggedness than conventional Pirani sensors with their fragile metallic spiral-wound filament. Simultaneous connection of up to eight vacuum sensors allows flexible measuring on the spot.

 

The DCP 3000 communicates with external components via the VACUU+BUSTM digital bus system. It is characterized by fully automatic configuration, unified plug connections and cable lengths of up to 30 m. In addition the DCP 3000 offers relative pressure measurements (VSK 3000 as reference) and a data logger feature for up to 32,000 data values.

Performance Features:

  • Up to four gauge heads VSK 3000 (Atm. - 0.1 mbar) and four VSP 3000 (Atm. - 10-3 mbar) can be simultaneously connected
  • Rugged VSP 3000 vacuum sensor made of plastics and ceramics with high chemical resistance, splash-water proof, for rough operating conditions
  • Wide measurement range from atmospheric pressure to fine vacuum

Technical Data:

  • Vacuum Sensor: VSP 3000
  • Cable length of vacuum sensor: 2 m
  • Upper measuring limit: 1000mbar / 750 torr
  • Lower measuring limit: 1 x 10-3 mbar / 1 x 10-3 torr
  • Measurement principle: Thermal conductivity (Pirani), chemically resistant plastics / ceramics
  • Accuracy of measurement: ± 15% of indicated value in the range 0.01-10 mbar/hPa/torr
  • Ambient temperature range (Operation): 10 to 40°C
  • Ambient temperature range (Storage): -10 to 60°C
  • Max. media temp. for continuous operation / short times: 40 / 80°C
  • Material of outer housing: Robust plastic housing with good chemical resistance
  • Wetted materials: Alumina ceramics, PBT, PUR
  • Vacuum connection: Small flange KF DN 16 and hose nozzle DN 6/10 mm
  • Degree of protection: IP 20
  • Degree of protection, front side of display unit: IP 42
  • Max. power for VACUU+BUSTM (24V DC): 4 A
  • Cable length of external power supply: 2 m
  • Interface: RS 232C
  • Mains voltage / frequency: 100-230V / 50-60Hz
  • NRTL certification: US and Canada
  • Dimensions of display unit: 5.43" L x 4.88" W x 4.53" H

Items Supplied: The set includes vacuum gauge DCP 3000 with external vacuum sensor VSP 3000, ready for operation, with wall-plug power supply, and manual.

Specifications

Specifications
Manufacturer Brandtech Scientific
Overall Height 4.53"
Overall Length 5.43"
Overall Width 4.88"
Country of Manufacture Germany
Item Ships From Connecticut

Literature 1

pdf
Instruction Guide
(Size: 2.1 MB)

Instructions

Seller warrants that its Products are free from defects in materials and workmanship as set forth in applicable operating instructions at the date of shipment to the original Buyer and will conform to the Contract specifications or such other specifications which constitute technical improvements to the Product.* The exclusive remedy of the Buyer in the event of a breach of the foregoing warranty is replacement or repair (at Seller's option) of any defective Product. No goods shall be returned to Seller for repair or replacement pursuant to this warranty without prior written approval and accompanied by a completed health and safety declaration (as specified in Paragraph 7). All cleaning, decontamination, and shipping costs shall be the sole responsibility of the Buyer together with any damage to the goods that might occur in transit to or from Seller. Under no circumstances does Seller's responsibility or warranty extend to Products other than those manufactured or distributed by Seller; nor does Seller's liability extend to any Products, articles or parts which are furnished by Buyer or obtained from other manufacturers or suppliers at Buyer's request and/or in accordance with Buyer's specifications. In the event that Seller is unwilling or unable to repair or replace any defective or nonconforming Product due to change in technical standards, technical modifications, unavailability of material or parts, or any other reason, Buyer shall be entitled to a return of the purchase price paid for such Product as its sole and exclusive remedy. Seller assumes no responsibility for the effective performance of any specific scientific application relying on Products supplied under this Contract beyond published Product specifications at the time of sale. Seller assumes no responsibility for conformance with local building codes as they may apply in the installation of Products supplied by the Seller. Seller assumes no responsibility whatsoever for the accuracy of designs, specifications or materials furnished or specified by Buyer.

Returns

No return will be accepted by the seller for any reason without prior written authorization. Returns will be accepted only if products are in new and unused condition and accompanied by a health and safety declaration as regards potential contamination with hazardous materials due to customer use of the product. The manufacturer reserves the right to assess a 25 percent restocking fee at their discretion. All shipping charges remain payable. This manufacturer assesses order cancellation fees if a submitted order is cancelled prior to shipment.

Reviews

Write a Review

Ask a Question

Customer Questions
This product has no questions.
Did you find what you were looking for?