6 Inch Replacement Bladder For Pneumatic Compression Paddle

Description

6 Inch Replacement Bladder for the PX-5000 radiology compression paddle .

• Bladder is comprised of Rubber & Latex
• 6" Bladder section x 21.75" L tube; tube length can be cut if needed

Additional Information

Country of Manufacture
Item Ships From	Florida
GSA Contract Number	V797D-40002

Reviews

Instructions

CLEANING OF SOILS & STAINS: Do not use products or methods that are not listed below. Do not Apply tape to any Pad.

• Wash with a generous application of neutral soap suds and lukewarm water. Rinse with water and dry. Do not immerse.

OR

• Use a diluted bleach solution of 10-parts water to 1-part bleach. Wipe dry with a clean cloth. Do not immerse. Bleach MUST be diluted to the 10:1 ratio.

All chemicals/solutions MUST be diluted to the manufacturers recommendations. No chemical or solution should be left to dry on the pad surface. After the allotted time has passed to insure disinfection, the pad surface should be wiped again with a wet cloth to remove the remaining chemical or solution.

DISINFECTING: Do not use products or methods that are not listed below. Do not Apply tape to any Pad.

• Use Lysol I.C. Disinfectant Spray by National Laboratories, Montvale, NJ, per manufacturer's instructions. Reference: National Laboratories Item # 95029-000

• Use a diluted bleach solution of 10-parts water to 1-part bleach. Wipe dry with a clean cloth. Do not immerse. Bleach MUST be diluted to the 10:1 ratio.

All chemicals/solutions MUST be diluted to the manufacturers recommendations. No chemical or solution should be left to dry on the pad surface. After the allotted time has passed to insure disinfection, the pad surface should be wiped again with a wet cloth to remove the remaining chemical or solution.

Returns

Customers wishing to return this product must contact Customer Service to obtain a valid return authorization number within 14 days of receipt. The item must be in new, resalable condition. A restocking fee may be deducted at the discretion of the manufacturer.