BrandTech PMP Griffin Beaker with Red Screened Graduations
Product Description
- Choose PMP (Polymethylpentene) Griffin Beaker for glass-like clarity
- Easily readable, printed red graduations; not raised
- Beakers are screened with approximate volumes
- Meet the requirements of ISO 7056
- To preserve markings, cleaning at no higher than 60°C is recommended
Item# | Volume |
Graduation
|
Height
|
Diameter
|
Quantity per Pack |
60503 |
10mL* |
2mL |
36mm |
30mm |
12 |
60603 |
25mL |
5mL |
50mm |
38mm |
12 |
60703 |
50mL |
10mL |
60mm |
47mm |
12 |
60803 |
100mL |
10mL |
70mm |
55mm |
12 |
60903 |
150mL* |
20mL |
80mm |
66mm |
12 |
61003 |
250mL | 25mL | 95mm | 77mm | 6 |
61103 |
400mL* | 50mL | 111.5mm | 87mm | 6 |
61803 |
500mL | 50mL | 117.5mm | 94mm | 6 |
61203 |
600mL* | 50mL | 126.5mm | 100mm | 6 |
61403 |
1000mL | 100mL | 147mm | 120mm | 6 |
61503 |
2000mL | 200mL | 187mm | 149mm | 6 |
61603 |
3000mL | 250mL | 212mm | 170mm | 4 |
61703 |
5000mL | 500mL | 247mm | 203mm | 4 |
*Variant in addition to ISO 7056
Specifications
Manufacturer | Brandtech Scientific |
---|---|
Country of Manufacture | Germany |
Item Ships From | Connecticut |
Literature
Instructions
How should I clean my volumetric plasticware?
Polyolefins, such as PP and PMP, as well as fluoroplastics (ETFE), have water-repellent surfaces that are very durable and easy to clean. For cleaning, depending on the level of contamination, commercially available neutral or alkaline detergents (i.e. Mucasol) can be used. Please note that no scrubbing agents or scouring pads should be used for labware made from plastics.
Plastic labware can be cleaned and dried in a laboratory dishwasher, noting the temperature limits of the individual products. Due to their light weight, securing the labware with washing nets is recommended; and plastic-coated wire baskets will better protect against scratching.
Plastic labware can also be cleaned in an ultrasonic bath. However, direct contact with the acoustic membrane should be avoided.